EASYFIX SNAPTOP FLOOR EDGES

This is an ingenious two part system designed to suit floors of different types, height and thickness. Typically a laminate floor is edged or joined using a base section and a decorative cover that snaps into the base using plastic clips. The system allows the cover to be removed and refitted should this be required. Floor coverings of up to 14mm can be accommodated.

When fitting the Easyfix Snaptop system, be sure to put the plastic clips onto the cover strip stem before pressing in, and not directly into the base section channel.

Please note that colours in product tables are descriptive only, with long-lasting anodised colouration or foil surfaces where applicable.

If you have any queries on the Snaptop Floor Edges range, or can’t find the edging you are looking for, please contact us with your Snaptop Floor Edges enquiries.

SNAPTOP BASES and FIXING CLIPS

These plastic bases have self adhesive tape applied and use plastic clips when fitting cover strips. The bases are designed for flooring of 8-13mm height and are available in 2 widths.

easyfix snaptop floor edge bases
Product Code Colour Pack £ ex Vat
Snaptop PVC Base (Self Adhesive) FC007 White 5 x 895mm 12.00
Snaptop PVC Base (Self Adhesive) FY007 White 3 x 2700mm 17.00
Snaptop Edges Fixing Clips FC096 n/a 10 x 6 4.70

SMALL ROUND SNAPTOP EDGE

This is a smooth domed edge that allows a floor of 8-13mm high to be edged down to a floor of as low as 0mm, for example a laminate floor to a vinyl floor.

easyfix round snaptop edge
Product Code Colour Pack £ ex Vat
Small Round Snaptop Edge
Small Round Snaptop Edge
Small Round Snaptop Edge
FC126
FC146
FC156
Beech
Maple
Alder
5 x 895mm
5 x 895mm
5 x 895mm
27.05
27.05
27.05

DOUBLE SNAPTOP EDGE

The double edge is for use with either Snaptop Base, for joining floors of the same height, for example laminate to laminate floor, leaving suitable space for floor expansion.

easyfix double snaptop edge
Product Code Colour Pack £ ex Vat
Double Snaptop Edge
Double Snaptop Edge
FC206
FC256
Matt Gold
Alder
5 x 895mm
5 x 895mm
23.65
27.05

COMBI SNAPTOP EDGE

This edge allows floors of differing heights to be joined, with a difference of up to 5mm, for example hessian backed carpet to laminate floor.

easyfix combi snaptop edge
Product Code Colour Pack £ ex Vat
Combi Snaptop Edge
Combi Snaptop Edge
Combi Snaptop Edge
FC306
FC346
FC356
Matt Gold
Maple
Alder
5 x 895mm
5 x 895mm
5 x 895mm
23.65
27.05
27.05
easyfix snaptop floor edges £50 minimum order
pay for your easyfix snaptop floor edges by card on the phone
easyfix snaptop floor edges carriage guidelines
easyfix snaptop floor edges handy packs from stock